RC E-Calc Pro 3.0
Continue to app
Paid Version
Publisher Description
RC E-Calc Pro - App by Graham Dyer
A calculator for electric powered RC model airplanes, RC helicopters, multirotors, RC cars, trucks and buggy's. If you use rechargeable batteries then this app is for you.
(Designed with Lithium-Polymer (LiPo) batteries in mind but any rechargeable battery including NiCd, NiMh and LiFe batteries can be calculated if you know the voltage.)
Try it, it's truly useful.
Now also with RC unit conversions, wing and cubic wing loading and battery gravimetric energy density.
(Please Note: This app has no malware and requires the following standard Android permissions only:
1) Network Access: View Wifi & networks: To check for new versions.
2) Phone Calls: To hide when a call comes through.
3) Storage: To install on the SD card if needed.)
Please EMAIL if you have a problem or find a bug or an incorrect calculation.
Use RC E•Calc Pro to calculate the following:
• Average Current Used by the aircraft during a flight/run.
• Average Discharge Rate (C•rate) of the LiPo battery during a flight/run.
• Expected Run Time at average current used.
• Expected Run Time using 100% capacity of a battery.
• Expected Run Time using 80% capacity of a battery.
• Realistic Run Time using 80% capacity of a battery and (selectable) average throttle.
• Power in Watts from Volts & Amps. (Ohm's Law)
• Volts from Power(Watts) & Amps. (Ohm's Law)
• Current in Amps from Power(Watts) & Volts. (Ohm's Law)
• Static thrust of a propeller in pounds or kilograms.
• Power to Weight Ratio in Watts•per•pound or Watts•per•kilogram.
• Unit Conversions (Torque, Mass, Length)
• Cubic Wing Loading (Imperial and Metric)
• Wing Loading (Imperial and Metric)
New for 3.0
• Built with AI2
• Multirotor expected flight time
• UI tweaks and improvements
• Fixed servo torque unit conversion
• Added area unit conversion
• New app exit (press back again to exit)
• New time representation
New for v2.3
• Added Battery cell gravimetric energy density calculation in Wh/kg
• UI enhancements and fixes
• Smaller fonts
• Cosmetic improvements to layout
• Unit Conversions improved
New for v2.21:
• Resize and refit for better display on tablets or devices with very large fonts
• Reworked Unit Conversions
• Cosmetic improvements to layout
• throttle value choice in Approximate Flight Time
New for v2.1:
• Unit Conversions (Torque, Mass, Length)
• Cubic Wing Loading (Imperial and Metric)
• Wing Loading (Imperial and Metric)
Examples:
(Note: It is highly recommended to fly using only 80% of the capacity of LiPo batteries to maximize their longevity)
a) If your system uses 16 Amps and a 2200mAh 3 cell battery, input 2200mAh and 16A into the app and it'll calculate that you should be able to fly (at FULL throttle) for 6 minutes 36 seconds until the battery is 80% depleted or 8 minutes 15 seconds (also at FULL throttle) until it is 100% depleted.
a) "Realistic" flight time is also calculated which works out to be 11 minutes and 47 seconds using 80% capacity and 60% average throttle, very close to the actual flight time achieved in the second image.
b) You have flown (or driven) for 11 minutes and 20 seconds, then recharged your 2200mAh LiPo, when finished your charger states that 1720mAh was returned to the battery. This app can then calculate:
• that the average current draw for the flight was 9.11 amps,
• the discharge rate was 4.1C,
• you used 78% of the rated capacity of the battery and
• to use 80% of the battery's capacity you could've safely flown for 11 minutes 35 seconds.
Please also see my free CG Calculator on the Play Store: ► CG Calc
Comments & suggestions very welcome, please email if you have any problems!
Disclaimer: The formulas used in these calculations come from various internet sources, with some variations added from my own experience. While a lot of effort was put into ensuring accuracy, your results may vary!
Built with App Inventor.
About RC E-Calc Pro
RC E-Calc Pro is a paid app for Android published in the System Maintenance list of apps, part of System Utilities.
The company that develops RC E-Calc Pro is Graham Dyer. The latest version released by its developer is 3.0.
To install RC E-Calc Pro on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2015-10-07 and was downloaded 43 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the RC E-Calc Pro as malware as malware if the download link to appinventor.ai_graham_dyer.RC_Ecalc_Pro is broken.
How to install RC E-Calc Pro on your Android device:
- Click on the Continue To App button on our website. This will redirect you to Google Play.
- Once the RC E-Calc Pro is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
- A pop-up window with the permissions required by RC E-Calc Pro will be shown. Click on Accept to continue the process.
- RC E-Calc Pro will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.
